Thank you for choosing this product. This product is made of aluminum alloy precision casting and is coated with metal copper-nickel-chromium. It has the characteristics of good heat dissipation, high hardness, high brightness, corrosion resistance, etc. In the use, we must pay attention to the following items:
1. This product should be stored in a dry and ventilated place before unpacking. The exhibits stored on the shelves are wiped once a month with car wax to keep them clean and dry.
2. It is strictly forbidden to contact with acid, alkali and salt, otherwise the surface will be corroded.
3. It is strictly forbidden to use sandpaper and hard brush as surface cleaning tools, otherwise the surface will lose its luster. A soft cloth such as a towel should be used.
4. It is recommended to fill the tire with dry nitrogen and try to avoid filling the tire with moist air under the humid air around the rain.
5. It is strictly forbidden to use soapy water to make lubricant for the tire when installing the tire, otherwise it will corrode the wheel hub and cause air leakage.
6. Some tire blackening agents are strongly acidic, and should avoid contact with the hub, otherwise the surface will have a yellowing phenomenon.
7. Try to avoid parking or driving on beaches, coal mines, chemical plants and other places where corrosive salts or gases are present to avoid surface corrosion.
8. After driving on the above road surface, you need to rinse it with water in time. After drying, wipe it with car wax.
9. It is recommended to clean the water once a week, and wipe it with the car decontamination wax every month. For the dust and asphalt that are difficult to remove, it can be removed with asphalt remover.